Menzerna Final Finish 3000 250ml (FF 3000) 250ml
The perfect one-step polish to enhance new and like new paint finishes.
Note: Menzerna Final Finish is the new version of Menzerna Final Polish. Menzerna has changed the name and label, but it is the same product you know and love. It is currently only available to select retailers.
Menzerna Final Finish (formerly Final Polish) is the original finishing polish made by Menzerna of Germany for use on OEM finishes to remove minor swirls and create a high gloss, reflective finish.Extremely fine abrasives polish the paint to actually remove minor spider webbing, not just temporarily hide it. This is an important point: most finishing polishes or prewax cleaners contain solvent cleaners to clean the paint and remove minor flaws. Menzerna Final Finish accomplishes the same goal through mechanical polishing action that permanently improves the paint surface and will not contribute to dulling in the long run.
Menzerna Final Finish is a pure polish with no glaze, fillers, or silicones. The water-based formula contains no solvent. It is safe on fresh OEM coatings and new repair coatings. Menzerna Final Finish will not create new swirls or leave haze, and it creates no dust. It leaves only a high gloss finish on all colors and types of paint, with or without a clear coat.
Use Menzerna Final Finish on brand new paint finishes or on vehicles in like-new condition. This is an excellent gloss-enhancing finishing polish to remove old wax, deepen the gloss, and remove minor swirls and imperfections prior to wax application. Final Finish can also be used after a stronger polish to remove haze and restore surface gloss.
This is called Final Finish but it’s an ideal first polish for newer vehicles that only have very fine swirls. The abrasives are extremely finely milled to prevent the creation of new swirls. Even on black paint, Menzerna Final Finish will produce an outstanding shine without a trace of micro marring.
Give your vehicle a show-stealing, high gloss finish with Menzerna’s best finishing polish. Menzerna Final Finish is absolutely flawless on all colors and types of paint.
Application by hand:
Mist any high quality applicator pad with a quick detailer to moisten the foam. Apply a nickel size amount of Menzerna Final Finish to the applicator.
Work in a back and forth, overlapping motion until the area starts to dry. Wipe off the polish with a damp Microfiber Towel. Work in 2 x 2 sq. ft. sections until the entire vehicle is done.
Application by Machine:
Make sure the surface to be polished is clean and dry. Fresh paint should be fully cured. Apply Final Finish out of direct sunlight.
Use a soft foam polishing pad, like Menzerna Light Yellow Cutting Pad. Apply a 6 inch line of compound to the vehicle. With the polisher turned off, spread the polish over about a 2 x 2 sq. ft. area.
Polish at 1200-1500 RPM (4500-5000 OPM on a dual action polisher) working slowly across and then up and down the area. Check your work after several passes to see if the swirls have been removed. If so, reduce the pressure and continue buffing until a high gloss is achieved. If the pad becomes dry, mist it with water and continue buffing.
Wipe the area with a damp Microfiber Towel.
Always apply a wax or sealant after polishing. We recommend MenzernaPowerLock to seal in the shine with its long-lasting polymer formula.
- A great finishing polish, designed to remove hazing, holograms and light surface imperfections
- Restores depth and gloss to the paints finish and is easy to work with
- Easy to remove with a clean microfiber towel
- It can be applied by hand but a buffer with a White Polishing Pad from Menzerna – Yellow Light Cutting Pad.
- For accurate product dispensing
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.