Menzerna Super Finish 3800 Plus(SF 3800 Plus) 1Ltr
Note: Menzerna Super Finish Plus SF-3800 is the new and improved version of Super Finish SF-4500. In addition to improving the formula, Menzerna has changed the name and label. It is currently only available to select retailers.
Menzerna Super Finish Plus is the first polish developed by Menzerna for the scratch-resistant, ceramic clear coats. The fine grade finishing polish removes 2500 grit sanding marks from the paint and eliminates compounding haze to leave the paint looking smooth and shiny.
Menzerna Super Finish Plus is one of Menzerna’s Professional Line car polishes formulated specifically for assembly line use. Mercedes Benz of Germany uses Menzerna polishes on their brand new vehicles to remove overspray and refine the newly cured paint finishes. Now body shops and enthusiasts can use Menzerna Super Finish Plus to achieve a new car gloss!
Though designed for fresh OEM coatings, Menzerna Super Finish Plus can be used as a gloss-enhancing polish or finishing polish on older paint finishes. It will eliminate compounding marks and prepare the paint for wax or sealant. (We highly recommend Menzerna Power Lock Sealant. The water-based formula is compatible with the Menzerna line and leaves the paint with a gorgeous gloss.)
Menzerna Super Finish Plus is body and paint shop safe. It contains no waxes, glazes, or silicones.
Apply Menzerna Super Finish Plus with a dual action or rotary (circular) polisher for the best cutting power. For gloss enhancement, Menzerna Super Finish Plus can be applied by hand.
Application by hand:
Mist the Applicatorpad with a quick detailer to moisten the foam. Apply a nickel size amount of Menzerna Super Finish Plus to the applicator.
Work in a back and forth, overlapping motion until the area starts to dry. Wipe off the polish with a damp Microfiber Towel. Work in 2 x 2 sq. ft. sections until the entire vehicle is done.
Application by Machine:
Make sure the surface to be polished is clean and dry. Fresh paint should be fully cured. Apply Menzerna Super Finish Plus out of direct sunlight.
Use a soft foam finishing pad, like Menzerna Premium Green Pad. Apply a 6 inch line of compound to the vehicle. With the polisher turned off, spread the polish over about a 2 x 2 sq. ft. area.
Polish at 1200-1800 RPM (5000-6000 OPM on a dual action polisher) working slowly across and then up and down the area. Check your work after several passes to see if the defects have been removed. If so, reduce the pressure and continue buffing until a high gloss is achieved. If the pad becomes dry, mist it with water and continue buffing.
Wipe the area with a damp microfiber cloth.
Always apply a wax or sealant after polishing. We recommend MenzernaPowerLock Paint Sealant to seal in the shine with its long-lasting polymer formula.
- Professional grade polish that will deliver stunning results.
- Bodyshop safe formula contains no fillers, silicones, waxes or glazes.
- Easy to apply and remove with less dust.